An elevator is a mandatory and constant part of each taller building’s architecture. The beauty of the functionality of the moving device brings both comfort and harmony. And whilst the typical elevators we get to use in a modern building nowadays are looking smart, sleek and simple, there are a few different mechanisms, that differentiate the types of elevators in general.

1.    Hydraulic Elevators

Hydraulic elevators use a hydraulic cylinder. That type of mechanism is most commonly used for low-level buildings with no more than 5 floors. That type of mechanism speeds up to 1m/s. The holeless hydraulic is a type of hydraulic elevator that is perfect for environmental-sensitive constructions, lowering the cost and offering a reliable service for 3-4-level buildings. The third type of hydraulic elevator – the roped one, is used with a rope system. That system enables the elevator to move further than the piston has to.

2.    Traction Elevators

Traction elevators are usually driven by an AC or DC electric motor. The movement happens after a worm gear is used to control the mechanism, rolling steel hoist ropes. The high-speed motor drives the gearbox which is attached to a sheave. That type of elevator mechanisms are commonly used for basement traction and speed up to 3m/s.

3.    Electromagnetic Elevators

The electromagnetic type of machine uses electromagnetic propulsion and cabling to move the elevator both horizontally and vertically. This mechanism is mostly used in high rise buildings with larger traffic.

4.    Climbing Elevators

That type of elevators can be seen in towers or guyed masts that need easy access in lesser space. Climbing elevators are a self-ascending type of a lift and usually can hold only one person climbing.

5.    Pneumatic Elevators

The last type of elevator mechanisms is called pneumatic. This kind of a lift has a distinguished vacuum-functioning mechanics. Because of the limitations in the actual mechanism design, that type of elevators doesn’t allow a larger group of people or heavy-duty materials to be transported with it. The typical maximum capacity is 1-3 passengers or up to 521lbs.

Elevators have three types of controlling mechanisms: manual, general and external. Before automatic elevators became to appear at the beginning of the 1930s, most of the motoring mechanisms were completely manual. The oldest prototypes were controlled by pulling ropes by elevators operators. Not long after that, relay-controlled elevators began to appear in order to deploy overall movement in the most efficient manner.

Nowadays, the typical elevator has a few components and are available in just about every commercial multi-story building. Modern elevators which are maintained by lift consultants from companies like Guardian Elevator operate without supervision of a manual operator and only require infrequent maintenance and support.

which are able to operate mostly unattended and only undergo routine maintenance from elevator consultants in ra

The elevator algorithm is fairly simple. It operates in an efficient manner that suggests a simple rule: the elevator keeps traveling in the same direction if there are remaining requests, if not, become idle at the last remaining stop until a request has been placed again.